UFO Propulsion
The bizarre, yet seemingly technologically feasible
claims of alledged 'Area 51' back-engineering
"The power source is a reactor which uses element 115 as its fuel. In this reactor element 115 is used as a target and is
bombarded with protons in a small, highly sophisticated particle accelerator. When a proton fuses into the nucleus of an
atom of 115, it is transmuted and becomes an atom of element 116. Although we too can transmute elements here on
earth, it is typically not done in this fashion, or at anywhere near this level of efficiency. Furthermore, we have yet to
produce anything heavier than element 112.

As soon as each atom of 115 is transmuted into 116, it immediately decays and produces a radiation unlike that which we
normally observe in nuclear decay. Each atom of element 116 decays and releases two anti-protons (anti-hydrogen), a
form of antimatter. Antimatter can be produced in particle accelerators here on earth, but only in minute quantities and
only stored for short periods of time.

The flux of antimatter particles produced in the reactor are channeled down an evacuated, tuned tube (which keeps it
from contacting with the matter that surrounds it) and reacted with a gaseous matter target. This Total Annihilation
reaction is the most efficient and energetic nuclear reaction there is. The more familiar nuclear reactions are Fission,
producing energy from the splitting of atoms as used in nuclear reactors & atomic bombs, and Fusion, the fusing or
combining of atoms (typically hydrogen nuclei) to release even more energy. Fusion is the reaction that powers the sun
and other stars and is what gives hydrogen bombs their "punch". These two more common nuclear reactions are
dwarfed by the power and efficiency of the annihilation reaction used in the alien reactor.

The reaction between the gaseous matter target and the antimatter particles produces a continous release of
tremendous amounts of heat. This heat is converted directly into electricity by the use of a thermionic Generator. The
Thermeonic generator used in this reactor is so efficient, that there is no detectable waste heat produced. This is an
apparent violation of one of the basic laws of thermodynamics. Similar, but not nearly as efficient or powerful, thermionic
generators are used as power sources in our satellites and space probes.

As amazing and efficient as all this seems, it is only secondary to the primary function of the reactor. The antiparticle flux
emitted from the transmuting element 115 is not the only energy radiated during operation. This is the point at which the
gravity A wave is first produced. The gravity wave emitted by the 115 reaction appears on the hemisphere of the reactor,
propagating up the tuned waveguide in a fashion very similar to the way microwaves behave.

All of the actions and reactions inside the reactor are orchestrated perfectly like a tiny little ballet, and in this manner, the
reactor provides an enormous amount of power used to amplify the gravity A wave so it can cause the requisite
space/time distortion for space travel.." -Bob Lazar

UFO Propulsion System - Bending time and space

Defense Scientists and Engineers are finally starting to understand the ultimate propulsion system that can make
instantaneous space travel possible. The UFOs use this propulsion system to travel great distances instantaneously.

The speed of light is 670,000,000 miles per hour – a number no human being can ever stand in any craft for a long time. Does
that mean UFOs are unmanned or extra-terrestrial beings are totally different? It is possible but not likely. Theory of evolution
in the Universe says that intelligent life forms are abundant in the Universe but they have evolved in a similar way.

Traveling even at the speed of light (670,000,000 miles per hour) is just not enough to cover distant destinations in the
Universe. For example even at that speed traveling from one constellation to another may take hundreds of years.

Then how can one travel such great distances in a short span of time? This is the million-dollar question that has made every
country in the world keep quiet about UFOs and cover up their existence and interaction. Every country believes they will be
the first to uncover the technology of “flash travel” which is the term used in traveling from point A to point B in the Universe

To understand the concept, imagine you have to travel from New York to New Delhi, two points in the opposite sides of the
globe. Now think you have the technology of freezing time and then get back to current time. At 9AM (or any other time of a
particular day), you take the instance of the globe and freeze it for travel. Now assume the globe is made of paper or some
other flexible material. Now you deform the globe and bring NY and New Delhi touch each other. Then travel from NY to New
Delhi instantaneously because the distance is really very little since you deformed the globe. After completing the travel you
put the globe back to its original configuration. And you transfer yourself to the current time.

This may seem complex but actually once the technology is mastered it is really simple. Another way to understand this is to
hold a piece of rectangular paper in your hand. Bring the two opposite corners of the rectangular piece of paper together
and make them touch each other. Now the distance between the two opposite corner is really zero.

Bending space and time is the concept where you do not travel to the destination; you bring the destination close to you. This
is exactly how UFOs travel from one destination to another. That is the reason why those who are waiting with their telescope
in the open sly to find UFOs will never find them.

Scientists and Engineers are now perplexed trying to understand how that kind of space travel is possible. The answer lies in
using something known as dark energy. The dark energy allows disintegration or deformation of space. There are some early
indications that dark energy also allows isolating time dimensions.

Physicists and Engineers are researching the use of dark energy. The purpose is to understand the process of bending the
space and time. That requires UFO flight patterns; sighting information and a mathematical algorithm to back calculate their
flight positions in a more than three dimensional geometry. Computer models are helping. We do not have the technologies
to capture or isolate time dimension. Can you draw a block or a cube on a piece of paper? Yes, you can. It is called an
isometric drawing

It is the process of drawing a three-dimensional drawing on a two dimensional paper. Similarly, complex algorithms are
allowing reverse engineering the UFO Time and Space bending in a medium that is three-dimensional. The resulting map is
showing the space and time (four dimensions) in a three dimensional environment.

Sometimes you wonder what any one can gain spending so much time and money to hide and cover up all the UFO
information? Why so much ridicule around something every country in running after since 1890? The answer is the fact that
any one who can master this time and space bending technology will be ahead of others by many years.

There are early indications that scientists and engineers have got the clue to the concept of bending time and space using
dark energy. Interestingly, the whole concept starts with Einstein’s Theory of Relativity.
"The craft sits 16 feet tall and 52 feet, nine inches in diameter. The skin of the
disc is metal which is the color of unploished stainless steel. The
SportModel sits on it's belly when it's not energized and not on the
steroetypical tri-pod legs that folk lore usually associates with this craft."
UFO Propulsion
IndiaDaily article of May 2005
All logos and trademarks are property of their respective owners.  "SKYMONSTERS" does not necessarily agree with the views
and/or opinions of other's comments posted on this site.  All the rest is copyright intent of "John Bro" Wilkie -1995-2015.